JIK-CY301 JIKET Electronic Control Box JIK-CY301 Series
Main Features Of Computer-Controlled System: •JIK730/740/750/760/780 series direct-drive computer overlock machine with interoperable control system; •JIK1558/N1668N series direct-drive coputer covering stitch machine with interoperable cotrol system; •JIK9188MX-D3/8188M-D3/998M-D3 series direct-drive computer plain stitch machine with interoperable control system,embedded display and plug-type display; •JIK7188M-D3/7188M-D2series direct-drive computer plain stitch machine with Interoperable control system;simple shear-thread and two-automatic functions can be used after resetting; •Simple shear-thread/two-automatic functions(without display)can be used for automatic cutting thread,automatic pulling thread,etc; •JIK730M-17DKS/740M-13DKS series overlock machine with interoperable peneumatic device; •Control system with multi-point positioning mode will make position-ing more accurately; •Software and hardware bi-directional protection;flow over control for solenoid valves; •Switching power supply system to ensure that reversed and supply power immediately,automatic prolection as well; •In case of any control system failure,please turn to professional and technical personnel,so as to avoid greater losses.
Control System Of Lockstitch Sewing Machine
Function
JIK-CY300 Direct-drive a variety of functions
QG682-PS Direct-drive a variety of functions
Motor Type
Ac Servo Motor
Ac Direct Drive Motor
Voltage Range
170-255V/50Hz
170-255V/50Hz
Output Power
550W
500W
Pulley Size
75
65
Needle Up/down
ο
ο
Slow Start(r/min)
100-2000
200-1500
The maximum speed limit(r/min)
3700
200-7500
Maximum speed(r/min)
50-4500
200-4000
Automatic needle sewing speed(r/min)
100-800
200-400
Thread Trimming/wiping
ο
ο
Automatic Reverse Stitching
ο
ο
Protection Device
ο
ο
Free Sewing/fixing Sewing
ο
ο
Mode Sewing
Four/Seven/Ten Sections
Four/Seven/Ten Sections
Stitch/backstitch
ο
ο
Accelerated Curve Adjustment
ο
ο
Adhystable Parameters
ο
ο
Automatic Test
ο
ο
Note:"ο" Is Standard Configuration.Presser Foot Lifter Is Optional.
Control System And Fault Code Of Overlock Sewing Machine And Interlock Sewing Machine
Function
JIK-8 Direct Drive Mult-functions
JIK-9 Direct Drive Mult-functions
Motor Type
Direct Drive Motor
Direct Drive Motor
Voltage Range
165-250V
165-250V
Output Power
350W
400W
Current
4.5A
4.5A
Frequency
50Hz
50Hz
Cartons
2
2
Poles
8
8
Revolutions
0-600r/min
0-3500r/min
Torques
0.20mm
0.20mm
Needle Position
Upper Position
Upper Position
E-01 Hardware Short-Circuit Protection
Damaged Controller Driver,Motor Coil Short Circutit,Instantaneous Over Current
